Conair Automobile Accessories HMC1 User Manual

4) Use your Seat Cushion only for its intended use as described in this manual.  
Do not use attachments not recommended by Conair.  
before using.  
3. Attach strap LD to strap RD, securing with the  
plastic hooks located on the end of each strap.  
or electronics store and consult a professional. Plugging in the car adapter will  
automatically activate the heat function. To turn the heat off, simply unplug the  
car adapter (or use the hand-held remote).  
IMPORTANT SAFETY  
INSTRUCTIONS  
15) If you are undergoing treatment for cancer, check with your physician  
before using.  
5) Never operate your Seat Cushion if it has a damaged cord or plug, if it is  
not working properly, or if it has been dropped or damaged, or dropped into  
water. Return the appliance to a service center for examination and repair.  
4. Pull strap C over your headrest and secure it to  
strap A using the buckle attached.  
16) Discontinue use of your Seat Cushion if you experience pain or swelling  
after use. Consult a physician or seek medical attention if symptoms persist.  
Warning! When not in use, the seat cushion car adapter should be unplugged  
from the cigarette lighter or auxiliary power source. If the car adapter is not  
unplugged and you remain seated on the cushion, it will continue to drain the  
battery of your vehicle even if your vehicle is not running.  
When using an electrical appliance, basic precautions should always be  
followed, including the following:  
Warning!  
6) Do not carry your Seat Cushion by supply cord or use cord as a handle.  
7) Keep the cord away from heated surfaces.  
Use caution when stretching and securing the  
elastic straps. The elastic straps may recoil and  
cause injury if you fail to properly secure the plastic  
hooks before releasing the elastic straps.  
Read all instructions before using this appliance.  
USE AND CARE  
8) Never drop or insert any object into the product.  
Congratulations on your purchase of the Obus Forme® by Conair® Heat and  
Massage Seat Cushion™. The Seat Cushion features heat for the lumbar  
area and four powerful massage motors, with three automatic safety shut-  
off devices. An ergonomically designed handheld controller built into the  
seat cushion allows you to personalize your experience with ease. The Obus  
Forme® by Conair® Heat and Massage Seat Cushion™ is ideal for use in your  
vehicle, at home and in the office.  
RD  
DANGER –  
To reduce the risk of electric shock:  
RC  
LD  
HOW TO OPERATE THE HEAT FUNCTION  
9) Do not operate where aerosol (spray) products are being used or where  
oxygen is being administered.  
1) Always unplug your Obus Forme® by Conair® Heat and Massage Seat  
Cushion™ from the electrical outlet or AC adapter immediately after using  
and before cleaning.  
Your Obus Forme® by Conair® Heat and Massage Seat Cushion™ has a built-in  
heat function.  
OPERATING YOUR OBUS FORME SEAT CUSHION  
Using the Car Adapter  
Plug the car adapter into your vehicle’s cigarette lighter or auxiliary power  
source. The car adapter requires 12 volts.  
10) To disconnect, turn all controls to the off position, then remove plug  
from outlet.  
1. Ensure that your seat cushion is plugged into an electrical outlet or an  
AC adaptor.  
2) Do not reach for an appliance that has fallen into water. Unplug immediately.  
3) Do not use while bathing or in a shower.  
4) Do not place or store your Obus Forme® by Conair® Heat and Massage Seat  
Cushion™ where it can fall or be pulled into a tub or sink. Do not place in or  
drop into water or other liquid.  
11) This massager should not be used in the following cases: Tuberculosis,  
benign and malignant tumors, hemorrhages, inflammations of the skin,  
phlebitis and thrombosis, open and fresh wounds, bruises, broken skin or  
varicose veins, undetermined calf pain, or joint pain.  
2. To activate the heat function, press the heat on/off button once, using the  
handheld controller.  
For optimum performance and safety, please read these instructions carefully  
before using your Seat Cushion.  
Warning! The car adapter must NOT be plugged into any cigarette lighter  
or auxiliary power source until you have confirmed that the cigarette lighter or  
auxiliary power source does not exceed 12 volts. Plugging the car adapter into  
the cigarette lighter or auxiliary power source found in some vehicles may cause  
the seat cushion to overheat and malfunction.  
3. To deactivate the heat function, press the heat on/off button again,  
using the handheld controller. The heat indicator light will go out.  
12) DO NOT attempt to remove the cover from your Seat Cushion.  
How to Secure your Obus Forme  
Seat Cushion to a Vehicle Seat  
1. Slide strap A and strap B over the back of  
13) Your Seat Cushion should not be used by children or individuals with certain  
disabilities. Please consult a physician before using your Seat Cushion in the  
case that you:  
WARNING –  
To reduce the risk of burns, fire, electric shock,  
SAFETY DEVICES  
For your protection, these seat cushions have three automatic safety devices:  
or injury to persons:  
• have any questions regarding its therapeutic usage;  
• have sensitive skin or poor circulation;  
your vehicle seat. Adjust the seat cushion  
on your vehicle seat to your personal  
1) An appliance should never be left unattended when plugged in. Unplug from  
outlet when not in use, and before putting on or taking off parts.  
2) Do not operate your Obus Forme® by Conair® Heat and Massage Seat  
Cushion™ under blanket or pillow. Excessive heating can occur and cause  
fire, electric shock, or injury to persons. This product is not intended for use  
while sleeping.  
C
The car adapter contains a three-amp fuse (F3A). If the car adapter is used  
properly, this fuse should not burn out. If it does, it can be replaced with another  
F3A fuse which can be purchased at most hardware or electronics stores. To  
replace the fuse, simply unscrew the top portion of the car adapter. Remove the  
old fuse and replace it with a new F3A.  
A
1. 30-Minute Massage Automatic Shut-off  
After 30 minutes, the massage and pulse functions will automatically shut  
off. You can turn these features on again after they have shut off. The heat  
function DOES NOT automatically shut off after 30 minutes. To turn off the  
heat function, you must press the HEAT button or unplug the car adapter from  
the power source.  
preference.  
• are experiencing unexplained pain or swelling;  
• have recently undergone a serious medical procedure or surgery;  
• have recently experienced a serious muscular injury;  
• are pregnant.  
B
2. Attach strap LC to strap RC, securing  
with the plastic hooks located on the end  
of each strap.  
Warning! Replace the F3A in the car adapter ONLY with another F3A. Using  
any other fuse may cause the car adapter to overheat and malfunction. If you  
are uncertain as to which fuse to use, take the old fuse to your local hardware  
3) Your Seat Cushion should not be used by, on, or near children or individuals  
with certain disabilities.  
LC  
RC  
14) If you are taking any prescription medications, consult your physician  
 

Contec Universal Remote RT U50 25S User Manual
Cornelius Bottle Warmer 720401106 User Manual
Craftsman Lawn Mower 91738862 User Manual
Crate Amplifiers Stereo Amplifier G212 User Manual
Crown Equipment Automobile ST 3000 Series User Manual
Delta Electronics Power Supply Series V48SB User Manual
Dynacord Portable Speaker LITTLEMAX User Manual
Fisher Price Crib 79658 User Manual
Fortinet Network Card FortiLog 100 User Manual
Garland Range PS 12 26 User Manual